Home > Product > UC System for Electric Locomotive

UC System for Electric Locomotive

S585V55-K7

Applications:Tunnel locomotive,Mining locomotive,Port truck

Characteristics:Designed with multiple protection case filled with nitrogen, safe and reliable

021-50802888
Please call for further information
Product catalogue

Summary

Characteristics

Customized system solution according to customer requirements, typical systems are S585V55-K7 and S585V73-K7

Working temperature window: -25~55 ℃

Designed with multiple protection case filled with nitrogen, safe and reliable

24 hours continuous operation

CMS can monitor the voltage, temperature, etc of each capacitor and automatically balance the voltage difference

Applications

Tunnel locomotiveMining locomotive

Port truck

Heavy duty traction vehicle

Other high power and high energy applications

See the product catalogue for more information

Dimension

Features

Part Number S585V55-K7
Nominal Capacitance(F) 1667
Operating Voltage Window(V) 420~590
Surge Voltage(V) 600
Stored Energy(kWh) 45
Standard Charge Current(A) 570
Standard Discharge Current(A) ≤570
Maximum Charge/Discharge Current(<20s)(A) 1140
Time for Charging(min) 20
Operating Temperature(oC) -25~+55
Storage Temperature(oC) -30~+65
Protection Level IP67
Electric Property Overvoltage, overcurrent, overheat, overload, short circuit, DC leakage protection, etc
Capacitor Management System Automatic balance, voltage monitor, temperature monitor, DC leakage monitor, etc
Cooling Mode Air cooling
Communication Interface CAN
Size(mm) 2600×1520×825
Weight(kg) 2500

Method & Notice

Test conditions

Ambient temperature: 25±5℃

Relative humidity: 25%~85%

Ambient pressure: 86~106kPa

Standards and Conformity

GB 4208-2008 Degrees of protection provided by enclosure (IP code)

GB/T 31467.1-2015 Lithium-ion traction battery pack and system for electric vehicles----Test specification for high power applications

GB/T 31467.3-2015 Lithium-ion traction battery pack and system for electric vehicles----Safety requirements and test methods

QC/T 741-2014 Ultra-capacitor for electric vehicles

Factory inspection standard of ultra capacitor system for electric locomotive

Operating requirements

System should be placed vertically upward during operation

As a high voltage device, the system shall not be used, disassembled or maintained by non -professionals.

When connecting the system to external circuit, the circuit switch must be cut off first, otherwise there would be danger of high-voltage shock

Before operating the system, connect communication cables to vehicle system correctly, and make sure the positive and negative polarity of power supply and load

Short-circuit and reverse connection of the system is strictly prohibited, cut off circuit and take safety measures once such cases happen

Check each parameter on the human-computer interface(HMI) to ensure the voltage of each cell is between 2.80~4.05V and the maximum voltage difference shouldn’t be larger than 200mV

The system case is filled with nitrogen to positive pressure, when the pressure in box is<0.01bar, nitrogen should be refilled until the pressure goes to 0.3~0.4bar

Please stop charging when peculiar smell or abnormal noise is found during charging the system

Abandoning used capacitor is strictly prohibited, please discharge capacitor to 0V before recycling

Storage and transportation requirements

Ambient temperature: -30~65℃

Relative humidity: 0~95%

Ambient pressure: 86~106kPa

System should be placed vertically upward during storage and transportation

Keep power interfaces protected in order to prevent collision, which may cause short circuit during the process of storage and transportation

System must be charged to rated voltage before long term storage and transportation. Check cell voltage difference every 45 days, when cell voltage difference is<200mV and >50mV, balance system should be activated until the cell voltage difference drops to ≤40mV, when cell voltage difference is>200mV, child node or capacitor should be checked, replace the bad child node or cell if necessary

When system is kept unused for longer than 1 year, it should be tested by Aowei before using.

Avoid contacting corrosive materials, keep away heat sources and fire sources

Prevent violent vibration, collision or crush during the process of transportation

Prevent exposing in the sun and rain, and keep dry and ventilated during transportation

The system can be transported by cars, trains, ships, etc

See the product catalogue for more information

Copyright © 2022 AOWEI TECHNOLOGY Shanghai ICP 2020037863-1   |  Download  |  Disclaimer |  Map